Skip to main content
Skip table of contents

Measure points with IMU

X-PAD Ultimate Survey 1.png | X-PAD Ultimate Build 1.png | X-PAD Ultimate GO 2.png

  • When the IMU is initialized, it is possible to measure points with the pole tilted.

  • The current pole tilt value is visualized on the IMU icon.

    image-20250714-083456.png

  • Measurements with IMU are stored with a specific icon.

  • For quality control the tilt value is recorded for every measure.

  • Changing the pole height, the point coordinate is recalculated.

    image-20250714-083530.png

  • Below video shows how to measure points with GNSS receiver and IMU.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close