Skip to main content
Skip table of contents

Antenna manager

  • When working with a single base station, it is important that the rover GNSS receiver adjust the base position by its phase center offset.

  • If working with a local base with a GNSS receiver not from GeoMax, the antenna phase center information is not available. In this case it is necessary to create the antenna. Instead GeoMax GNSS receiver are preloaded.

  • This do not apply when the connection is to an NTRIP caster, even if corrections are coming from a single antenna, because usually NTRIP caster provides a ADVNULLANTENNA.

  • To create a custom antenna in the database click New Antenna from the toolbar.

    image-20251030-110047.png

  • Enter the antenna parameters.

    image-20251030-110216.png

You can find the antenna parameters in different online database, for example in Antenna Calibrations

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close