Skip to main content
Skip table of contents

Firmware update

Before upgrading the firmware, it is recommended to check the firmware version currently loaded.

Perform this operation only with battery charged.

  • If the installed firmware is older than the latest one available in the GeoMax Partner Area or XPAD365 repository, it is recommended to perform an update.

  • Download the latest firmware file and copy it in a microSD card, inside a folder called SYSTEM.

  • Start Zenith Manager and select “Firmware update”.

    image-20251030-111006.png

  • Select the firmware file copied in the microSD card. Click UPLOAD.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close