Skip to main content
Skip table of contents

Antenna File

  • Antenna file page is used to upload base antenna calibration values to the instrument.

    image-20250605-123037.png

  • The files in this page include the database of all antenna calibration available.

  • The antenna files are used to correctly apply the phase center offset from the base receiver, when receiving RTK corrections.

When working with a CORS network, the network always provide corrections related to an antenna called GPPNULLANTENNA or ADVNULLANTENNA where the offset are zero.

  • Normally there is no need to upload new files, but in case the base definition are missing, for example since the base model has been released recently, it is possible to download new files from Antenna Calibrations.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close