Skip to main content
Skip table of contents

Enter coordinates

  • Use references to draw. Some drawing commands activate the coordinate input bar.

    image-20241008-124729.png

  • Available commands:

Command

Procedure

Point name

  1. Enter the name of the point in the Point name field

image-20241008-124810.png

Draw a line or polyline/Absolute coordinates

  1. Indicate the location of the first vertex

  2. Click image-20241008-124910.png

  3. Enter the X, Y, and Z coordinates referring to the reference system

image-20241008-124931.png

Draw a line or polyline/Relative coordinates

  1. Indicate the location of the first vertex

  2. Click image-20241008-124931.png

  3. Enter the shift value for the X, Y, and Z axis

image-20241008-125014.png

Draw a line or polyline/Polar coordinates

  1. Indicate the location of the first vertex

  2. Click image-20241008-125014.png

  3. Enter the angle and/or the distance

image-20241008-125138.png

Lock coordinates

  1. Click image-20241008-125138.png next to one of the coordinates.

  2. Constrain the drawing of a line or polyline to a value of one of the coordinates

image-20241008-125138.png

Lock the angle

  1. Click image-20241008-125138.png next to one of the coordinates. The icon appears when the insertion is made using the polar coordinates option

  2. Constrain the drawing of a line or polyline to the set angle

image-20241008-125138.png

Lock the distance

  1. Click image-20241008-125138.png next to one of the coordinates. The icon appears when the insertion is made using the polar coordinates option

  2. Constrain the drawing of a line or polyline to the set distance

The drawing options for coordinate input and X, Y, Z coordinate lock are also available from the context menu by right-click on the mouse

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close