Skip to main content
Skip table of contents

Voice commands

X-PAD Ultimate Survey 1.png | X-PAD Ultimate Build 1.png

  • The tab allows to set the vocal commands to execute the operations to management the surveying, stakeout, and handling of TPS and GNSS.

  • It is possible to customize the commands by entering the preferred word to start the action. To improve the command recognition reliability, run a self-learning procedure that consists of repeating the command 10 times.

To use voice commands, you must set the system language correctly in the device settings in the voice recognition menu. Recognition is faster when used in Off-line mode

  • Click Settings.

  • Click Voice commands.

    image-20250324-143449.png

  • Customize the commands entering the preferred word for each actions. Actions are divided in different tabs for Survey, Stakeout, TPS and GPS with the most comune commands.

  • Click on the arrow close to a vocal command to start the self-learning procedure, repeating the word 10 times, to improve the command recognition reliability.

    image-20250324-143644.png

  • Click Tools and Load default voice commands to restore the default commands.

You can use vocal commands during survey or stakeout, activating the option in the top bar.

image-20250324-143915.png

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close