Configuration with X-PAD software

Configure and operate the Zenith16/40 using the X-PAD Ultimate field software running on a field controller being connected via Bluetooth.
For more details on how to use the X-PAD Ultimate field software, please refer to its User Manual.
In this guide we will see the basic steps on how to create a profile for the Zenith16/40 in X-PAD Ultimate software.

This list shows the most common working profiles.

Rover network profile with internet from SIM card inside the receiver: how to configure the GNSS receiver to receive RTK corrections from internet with SIM card inside the receiver. (only available for Zenith40).
Rover network profile with internet from field controller: how to configure the GNSS receiver to receive RTK corrections from internet with internet from the field controller.
Rover profile with internal radio: how to configure the GNSS receiver to receive RTK corrections from a base connected by UHF.
Base profile with internal radio: how to configure the GNSS receiver to work as base with internal UHF.