-
The Zenith60 Pro WebManager software can be used to set up, configure and operate the instrument, download data from the instrument and microSD card, enter licence keys and upload firmware.
-
Access the WebUI: how to access the GNSS receiver WebUI:
-
Hardware Information: to view information about the GNSS instrument such as firmware versions and hardware models.
-
Position/Link Information: to view the current status of the GNSS instrument.
-
Satellite Information: to view a list or skyplot of all currently used and tracked satellites.
-
Satellite settings: to enable or disable satellite systems or individual satellites.
-
Sensor settings: to configure the sensor settings and working mode including NMEA streaming.
-
Format sensor: to format the memory and microSD card, reset to factory settings, perform a self-test on the instrument or restart the instrument.
-
Firmware File: to upload instrument, ME, UHF and GSM firmware.
-
Antenna File: to upload base antenna calibration values to the instrument.
-
Data manager: to download data files from the internal memory of the instrument or the inserted microSD card in DAT or RINEX formats.