Zenith UHF Base – Rover configuration
-
This table provides the recommended configuration for Zenith GNSS smart antennas.
|
Settings |
Base (TRU35) Zenith Manager |
Rover (Zenith) X-PAD Ultimate |
|---|---|---|
|
Frequency* |
410-470 MHz |
Same as base |
|
Protocol |
SATEL 3AS |
Satel 3AS / Satel 4FSK |
|
Radio air interface rate / Channel spacing |
9600 (12.5 kHz) or 19200 (25 kHz) |
Same as base |
|
Forward Error Correction (FEC) |
On or Off |
Same as base |
|
Emissive power* |
Low (10 W) or High (30 W) |
n/a |
|
Baud rate |
115200 With Zenith15/25 base set 19200 |
n/a |
*Frequency and output power must follow national laws and regulations.
General compatibility overview
-
The below table shows the compatibility between the TRU35 external radio and the radio used on GeoMax rover GNSS receivers.
|
TRU35 |
Satel TR4+ (Zenith16/60/60PRO) |
TRM101 (Zenith55) |
Microhard (Zenith15/25) |
||||
|---|---|---|---|---|---|---|---|
|
Protocol |
FEC |
Protocol |
FEC |
Protocol |
FEC |
Protocol |
FEC |
|
SATEL 3AS |
On/Off |
SATEL 4FSK |
On/Off |
SATEL 4FSK |
On/Off |
- |
- |
|
PCC-4FSK |
On |
Pacific Crest 4FSK |
On |
Pacific Crest 4FSK |
On |
- |
- |
|
PCC-GMSK |
On |
Pacific Crest GMSK |
On |
Pacific Crest GMSK |
On |
- |
- |
|
TRIMTALK (P) |
Off |
TRIMTALK GMSK 450S (P) |
Off |
TRIMTALK GMSK 450S (P) |
Off |
TRIMTALK (P) |
Off |