Lists of video tutorials regarding the use of GNSS equipment with software X-PAD Ultimate.
Survey with GNSS interface and basic commands First steps on how to perform a survey using GNSS equipment. |
How to open the GNSS status to check real time information on the GNSS receiver. |
Measure points by pole offset with IMU How to measure hidden points with GNSS with IMU using the function by pole offset. |
Surveying with GNSS receiver and IMU How to work with IMu receivers to measure points while the pole is tilted. |
How to use the function Advanced average and analysis to measure control points with GNSS with advanced checks on accuracy. |
Static survey with GNSS receiver How to perform a survey with GNSS equipment. |
How to perform a GNSS site calibration to calculate a local system using a set of known points. |
How to calculate a local system for GNSS localization using a single point. |
How to start the GNSS base for a base-rover setup. |
How to configure the GNSS simulator How to configure the GNSS simulator to experience the software without a real instrument connected. |
How to change specific settings related to the operations with GNSS receiver. |
How to start the NMEA streaming from a GNSS receiver to external devices. |