Quick guide
This quick guide provides complete step-by-step instructions for preparing the Zenith06 GNSS for measuring work.
The instructions cover all the required installation tasks for the Zenith GNSS receiver and Zenith Manager software.
Only the tasks required for the initial setup of a new Zenith06 system are described in this document.
For further information regarding the operation of the Zenith06 components, please refer to the respective User Manual. The User Manual for the GNSS receiver is available from X-PAD365 portal after instrument registration (see Assets manager on how to register your device).
For further information on how to work with X-PAD Ultimate field software please refer to the online X-PAD Ultimate help portal.
General preparation: how to prepare the instrument for field operations.
Instrument components: understanding instrument componenents and buttons.
Connection to Zenith Manager: how to connect the GNSS receiver to Zenith Manager application.
Stream out NMEA message from Zenith Manager step-by-step: how to start the NMEA streaming from Zenith Manager application.
Firmware update: how to upgrade the receiver firmware.
Configuration with X-PAD software: how to configure and start to work with X-PAD Ultimate field software and Zenith06.
Working with IMU: how to work with the IMU for tilt compensated measurements.