Instrument settings

| |

• The Instrument settings page is used to:

  1. Set the connection between the instrument and a device

  2. Define parameters for the operation between the instrument and a device

• All parameters of connection and operation are organised in profiles. A profile has the connection mode of the instrument and all related operation parameters.

• For the same instrument, different profiles with different operation parameters can be created and recalled.

• Among all profiles available only one is the current profile. The current profile is used during the use of the software.

The instrument list includes by default the GNSS simulator profile and the manual total station profile.

• The instruments page: an overview to the instrument page.

• Instruments page tools: how to modify and edit the instrument profiles list.

• Creating a profile for GNSS receiver: step-by-step procedure on how to create a profile for a GNSS receiver.

• Creating a profile using the GNSS of the controller: step-by-step procedure on how to create a profile for using the internal GPS receiver of the controller.

• Creating a profile for total station: step-by-step procedure on how to create a profile for a total station.

• Creating a profile for laser distance meter: step-by-step procedure on how to create a profile for a laser distance meter.

• Creating a profile for echo sounder: step-by-step procedure on how to create a profile for an echo sounder to be used with Bathimetry module.

• Creating a profile for cable locator: step-by-step procedure on how to create a profile for a cable detector to be used with Locator module.

Video tutorials
Create a TPS profile for Zoom75/95 How to create an instrument profile for robotic total station Zoom75/95.	Create a TPS profile for Zoom10 How to create an instrument profile for manual total station Zoom10.
Use and create a QR code How to use and create a QR code to quickly connect to an instrument.	Create a GNSS base UHF profile How to create and start a GNSS receiver as base using internal radio.
Create a GNSS rover Network internal internet profile How to create a GNSS rover profile using internet from a SIM card inside the GNSS receiver.	Create a GNSS rover UHF profile How to create a GNSS rover profile using internal radio to receive corrections from a local radio base.
Create a GNSS rover Network ext internet profile How to create a GNSS rover profile using internet from the Android controller.	How to Pair EziCAT i750XF locator How to connect and pair EziCAT locators with X- PAD Ultimate software, using the locator optional module.