Survey points - TPS
| 
| 
This chapter explains commands allowing measuring of points with mechanical and robotic total station instruments. Different operative modes are explained.
In order to survey points with a TPS, a Station setup is required.
For common operations when working with a GNSS or a total station refer to Survey points.
TPS Survey interface: understanding the graphic interface.
Rapid measure of a TPS point: how to measure and store a point.
Measure of a TPS point: how to measure and store a point editing the properties.
TPS measure mode: understanding the different measure modes with a total station.
Automatic TPS survey of points: how to measure automatically points according to the selected rule.
Sets of angle: application to measure multiple sets of angles and distances.
Scan plane/surface: application to perform scanning with a robotic total station of planes and surfaces.
Scan lines: application to perform measurement of a cross section with a robotic total station.
Video tutorials | |
|---|---|
 How to perform a survey using a total station. | |