-
This chapter explains commands allowing measuring of points with mechanical and robotic total station instruments. Different operative modes are explained.
In order to survey points with a TPS, a Station setup is required.
For common operations when working with a GNSS or a total station refer to Survey points.
-
TPS Survey interface: understanding the graphic interface.
-
Rapid measure of a TPS point: how to measure and store a point.
-
Measure of a TPS point: how to measure and store a point editing the properties.
-
TPS measure mode: understanding the different measure modes with a total station.
-
Automatic TPS survey of points: how to measure automatically points according to the selected rule.
-
Sets of angle: application to measure multiple sets of angles and distances.
-
Scan plane/surface: application to perform scanning with a robotic total station of planes and surfaces.
-
Scan lines: application to perform measurement of a cross section with a robotic total station.
|
Video tutorials |
|
|---|---|
How to perform a survey using a total station. |
|