Instrument settings

| |

• The Instrument settings page is used to:

  1. Set the connection between the instrument and a device

  2. Define parameters for the operation between the instrument and a device

• All parameters of connection and operation are organised in profiles. A profile has the connection mode of the instrument and all related operation parameters.

• For the same instrument, different profiles with different operation parameters can be created and recalled.

• Among all profiles available only one is the current profile. The current profile is used during the use of the software.

• The instruments page: an overview to the instrument page.

• Instruments page tools: how to modify and edit the instrument profiles list.

• Creating a profile for GNSS receiver: step-by-step procedure on how to create a profile for a GNSS receiver.

• Creating a profile using the GNSS of the controller: step-by-step procedure on how to create a profile for using the internal GPS receiver of the controller.

• Creating a profile for total station: step-by-step procedure on how to create a profile for a total station.

• Creating a profile for laser distance meter: step-by-step procedure on how to create a profile for a laser distance meter.

• Creating a profile for echo sounder: step-by-step procedure on how to create a profile for an echo sounder to be used with Bathimetry module.

• Creating a profile for cable locator: step-by-step procedure on how to create a profile for a cable detector to be used with Locator module.

Video tutorials
Create a TPS profile for Zoom75/95 How to create an instrument profile for robotic total station Zoom75/95.	Create a TPS profile for Zoom10 How to create an instrument profile for manual total station Zoom10.
Use and create a QR code How to use and create a QR code to quickly connect to an instrument.	Create a GNSS base UHF profile How to create and start a GNSS receiver as base using internal radio.
Create a GNSS rover Network internal internet profile How to create a GNSS rover profile using internet from a SIM card inside the GNSS receiver.	Create a GNSS rover UHF profile How to create a GNSS rover profile using internal radio to receive corrections from a local radio base.
Create a GNSS rover Network ext internet profile How to create a GNSS rover profile using internet from the Android controller.	How to Pair EziCAT i750XF locator How to connect and pair EziCAT locators with X- PAD Ultimate software, using the locator optional module.