-
The atmospheric coefficients page allows to define the values that must be considered for the calculation of the distances measured.
-
It is possible to access the coefficients page from different pages:
-
In the station setup page click Atmospheric coefficient.
-
With robotic total stations open the Robotic TPS page, click Tools and select Atmospheric coefficients.
-
With mechanical total stations open the TPS Settings page and click Coefficients.
-
-
The page allows to define atmospheric corrections and refractive/sphericity.
-
Atmospheric correction: activate to define and consider the parameters.
-
Temperature (°C): value for the temperature in degrees Celcius. Click on the orange arrow to change the temperature unit from Celsius to Fahrenheit.
-
Pressure (mb): value for the pressure in millibar. Click on the orange arrow to calculate the pressure from altitude and pressure at sea level or from altitude.
-
Humidity (%): value for humidity in percent.
-
Atmospheric PPM: the calculated PPM considering all parameters is displayed.
-
Refraction/Sphericity: activate to define and consider the parameters.
-
Refraction coeff.: value for the refraction.
-
-
It is also possible to load information from the weather information clicking on Tools and selecting Load info from weather.