CAD Toolbar

| |

• CAD has different toolbar depending on what is selected.

  • If a point is selected a toolbar with context commands is displayed.

    

  • If a drawing object is selected a toolbar with context commands is displayed.

    

Toolbar for points

• Select a topographic point without any command being active.

• A toolbar with context commands is displayed.

  

  • Stakeout: starts the stakeout procedure from CAD.

  • ID: opens the window allowing to display and edit the data of the point.

  • Distance: calculates the distance from the selected point to another point for displaying in the graphic window.

  • Dist.Object: calculates the distance from the selected point to an object for displaying in the graphic window.

  • Delete: deletes the selected point.

  • Layer: opens a new toolbar with commands on point layer.

    • Isolate: turns off all layers, except the layer of the selected point. To restore the previous display, select a point and click Restore layers.

    • Layer off: turns off the layer for the selected point.

• Click anywhere else in the graphic window. The main toolbar appears again.

Toolbar for CAD objects

• Select a drawing object without any command being active.

• A toolbar with context commands is displayed.

  

  • Stakeout: starts the stakeout procedure from CAD.

  • Info: opens the window allowing to display and edit the data of the object. When an area is selected as object, it is possible to enter the height and calculate a volume.

  • Delete: deletes the selected object.

  • Layer: opens a new toolbar with commands on point layer.

    • Isolate: turns off all layers, except the layer of the selected point. To restore the previous display, select a point and click Restore layers.

    • Layer off: turns off the layer for the selected point.

• Click anywhere else in the graphic window. The main toolbar appears again.